NEMA 2-30 — 250 V, 30 A Plug & Receptacle
NEMA 2-30 is a straight-blade configuration per NEMA WD-6: 250 V, 30 A, 2-pole 2-wire non-grounding. Obsolete non-grounding 250 V. The receptacle is 2-30R, the matching plug 2-30P.
Face diagrams by Comrade Mmirg via Wikimedia Commons, CC BY-SA 4.0 / CC0, unmodified.
Specifications
- Configuration
- 2-30
- Series
- Straight blade
- Voltage rating
- 250 V
- Amp rating
- 30 A
- Poles / wires
- 2P–2W
- Neutral
- No
- Equipment ground
- No
- Max load (at rating)
- 250 V × 30 A = 7,500 VA
- Continuous (80%)
- 6,000 VA
Load figures are the arithmetic of the device rating at unity power factor. Continuous loads (3 hours or more) are limited to 80% of the circuit rating per NEC 210.19/210.20 — and the branch circuit behind the receptacle comes from the load calculation and conductor sizing, not from the plug face.
Where you meet it
Obsolete non-grounding 250 V. As a non-grounding configuration it survives only for replacements on existing circuits — new work uses the grounding successor family.
RELATED CONFIGURATIONS
See every configuration on the full NEMA plug & receptacle chart →
Common questions
What is the difference between 2-30R and 2-30P?
The letter is the device: 2-30R is the receptacle (outlet), 2-30P is the plug on the cord. Both share the same configuration — 250 V, 30 A, 2-pole 2-wire non-grounding.
Does NEMA 2-30 have a neutral and a ground?
No neutral — the 250 V rating means the circuit runs line-to-line with no neutral. It is a non-grounding configuration: no equipment ground, which is why new installations use its grounding successor.
RUN THE NUMBERS
Run your whole job on the same numbers
These NORDIX tools are a taste of the full platform — bid pipeline, estimating, and job costing that carry your numbers from the first bid to the final invoice.
See what NORDIX does →