NEMA 6-30 — 250 V, 30 A Plug & Receptacle
NEMA 6-30 is a straight-blade configuration per NEMA WD-6: 250 V, 30 A, 2-pole 3-wire grounding. 240 V fixed appliances, larger AC units. The receptacle is 6-30R, the matching plug 6-30P.
Face diagrams by Comrade Mmirg via Wikimedia Commons, CC BY-SA 4.0 / CC0, unmodified.
Specifications
- Configuration
- 6-30
- Series
- Straight blade
- Voltage rating
- 250 V
- Amp rating
- 30 A
- Poles / wires
- 2P–3W
- Neutral
- No
- Equipment ground
- Yes
- Max load (at rating)
- 250 V × 30 A = 7,500 VA
- Continuous (80%)
- 6,000 VA
Load figures are the arithmetic of the device rating at unity power factor. Continuous loads (3 hours or more) are limited to 80% of the circuit rating per NEC 210.19/210.20 — and the branch circuit behind the receptacle comes from the load calculation and conductor sizing, not from the plug face.
Where you meet it
240 V fixed appliances, larger AC units. Family 6 overall: welders, ev charging, 240 v equipment (6-50). Blade geometry keys the voltage family physically: a plug from a different voltage class will not enter this receptacle.
RELATED CONFIGURATIONS
See every configuration on the full NEMA plug & receptacle chart →
Common questions
What is the difference between 6-30R and 6-30P?
The letter is the device: 6-30R is the receptacle (outlet), 6-30P is the plug on the cord. Both share the same configuration — 250 V, 30 A, 2-pole 3-wire grounding.
Does NEMA 6-30 have a neutral and a ground?
No neutral — the 250 V rating means the circuit runs line-to-line with no neutral. It carries an equipment grounding conductor (the extra wire beyond the poles).